Location

Molalla, OR 97038

Phone Number

(503) 737-4102

Mistakes People Do While Installing Concrete

Mistakes People Do While Installing Concrete

Table of Contents

Introduction

Concrete installation is not as simple and straightforward as it seems. A wealth of preparation occurs before a single drop of concrete is poured onto the site. Concrete companies in Mollala OR, provide services where you have the option to take guidance. What works for one site may or may not work for another. 

Here we have explained the top 16 mistakes people make while installing concrete in hopes of avoiding some costly expenses:

Not understanding what should be the exact amount of concrete needed for the project

Concrete in Molalla OR always has three dimensions, and one of the first and foremost mistake people make while choosing concrete is to underestimate how thick the concrete needs to be for the project.

Not rounding up an order of concrete.

Concrete in Tigard OR, dries up very quickly, which leaves no time to make mistakes or adjustments once it has been poured. While placing the order for the concrete, make sure not to do this mistake. 

Assuming that all the concrete is the same

Concrete comprises three basic ingredients: Portland cement, water, and aggregates. There are five types of Portland cement: 

  • General purpose
  • Moderate sulfate resistance
  • High early strength
  • Low heat of hydration
  • High sulfate resistance

Failing to have all the proper tools on hand

One thing that must always be kept in mind is the narrow window of time in which concrete can be worked once it is poured. Preparation is of utmost importance while installing concrete.

Underestimating the importance of properly supported concrete forms

Forms provide the container for the fluid concrete and hold it in the proper shape until it holds its weight on its own after fully hardening and drying. 

Rushing to pour the concrete with proper site preparation

Improper site preparation may cause numerous headaches. Take your own time to prepare the site correctly. 

Failing to use the reinforcement when it is needed.

Reinforcing concrete and steel is a common practice because the properties of steel complement those of concrete.

Placing the steel mesh reinforcement incorrectly.

Steel mesh is one of the concrete reinforcement options, but it is specifically popular because it can be a dent to fit into many shapes, like walls or columns. 

Using an incorrect cement/water ratio

The water/ cement ratio corresponds to the weight of the water to the weight of the cement in the overall concrete mixture. The water/ cement ratio can affect workability, strength, and durability. 

Trying to pour concrete in poor weather conditions.

Warm or rain-free days are ideal for pouring concrete, so make sure you have ideal weather conditions to pour the concrete. 

Walking away after pouring the concrete

Concrete has liquid properties when freshly mixed, but pouring it will not result in the level, even the surface, without a little work. 

Removing forms before the concrete is truly dry.

The molding forms hold the concrete in place until that dries and should be left alone for at least two days to ensure that the concrete is completely dry. If the forms are removed too soon, the concrete will begin to sag, collapse, or crack, so you need to take care of that. 

Overworking on the concrete.

The concrete does not need any extra attention after that has been poured, but if it moves around too much or is overworked, it can cause multiple problems. 

Creating a slippery finish for the walkaways

For concrete slabs, particularly, a textured finish is a matter of safety. It not only adds visual interest but also looks aesthetically pleasing. Smooth concrete can help very slippery and slick. 

Being impatient during the curing process

Pouring, setting, and finishing concrete will take time. So you need to be very patient during the curing process.

Ordering the wrong kind of concrete

Not all cement is the same. Cement is composed of aggregate Portland cement and water. There are five types of Portland cement and seven different kinds of admixtures. All the options create different kinds of mixtures, so choose the one that will be the best one for your needs. 

Install Your Concrete the Right Way!

We provide services to commercial and residential clients at NW Concrete Designs and stamped concrete patio in Wilsonville OR. We provide a variety of concrete and are here to deliver unlimited arrangements and choices. We advise installing concrete design into the exterior or interior of your home, workplace, gallery, and retail space so that you can enjoy your beautiful spaces for years to come.

You can get in touch with us to learn more about our services & products. 

Leave a Reply

Your email address will not be published. Required fields are marked *

CONTACT US

May we text your mobile number?
Will you be home or at the site at the time of service?
Is your project:

Recent Posts

Category

Tags

Concrete companies in Mollala OR, Concrete in Mollala OR, concrete in Tigard OR, stamped concrete patio in Wilsonville OR